Risk Rap

Rapping About a World at Risk

Sum2’s Hamilton Plan Gets Some Scholarly Attention

The following research paper on The Hamilton Plan was written by Deepak Verma, a business student at Baruch College.  To our knowledge it is the first scholarly research that incorporates the Hamilton Plans theme of a focus on SME manufacturing.

ISSUES MANAGEMENT PROJECT
Prof. Michael Kirk Stauffer

DEEPAK VERMA
The Societal and Governmental Environment of Business
Baruch College, the City University of New York
December 16, 2009

Table of Content

Topic Page No
1. Executive Summary 2
2. The Issue: Shrinking Manufacturing Base 3-4
3. The Origin of the Issue and Solution 4-5
4. Small & Medium Enterprises; Catalyst of Sustainable Growth 6
5. Initiative for Development of SMEs 7-8
6. Future of SME and SMEs in USA 9
7. Appendix : References 10

EXECUTIVE SUMMARY
Living beyond means is not sustainable. One of the primary reasons of prolonged Economic and Credit Crisis in United States is its low manufacturing base and American way of consuming more than what is produced. This research paper will examine issue of shrinking manufacturing base of USA, unfair and unethical business practices adopted by countries such as China to boost export thereby causing trade deficit to USA, reasons for low manufacturing base and role of small and medium enterprise (SME) manufacturers in developing a sustainable manufacturing base of the US economy.

Prior to coming at Baruch College for pursuing MBA in finance and investments, I worked for over 10 years with Small Industries Development Bank of India (SIDBI), an apex financial institution of India engaged in the development and financing of SMEs and micro financial institutions. Having worked with this financial institution, I realized the importance of SMEs in bringing sustainable economic development and employment creation, particularly in a mixed economy like India.

The paper will discuss on public-private initiative in USA for development of SMEs, their efforts and capital investment for empowerment and financing of SMEs. Various initiatives taken by private and public sector will be analyzed. Efforts have been made to forecast future of SMEs vis a vis manufacturing sector, role of community development financial institutions (CDFIs), and flow of commercial bank credit and private equity investment in SMEs in the United States.

THE ISSUE: SHRINKING MANUFACTURING BASE
Why should shrinking manufacturing base be an issue in a market driven service oriented economy like US? Federal Reserve Chairman Ben Bernanke stated on Feb. 28, 2007, “I would say that our economy needs machines and new factories and new buildings and so forth in order for us to have a strong and growing economy.” Strong Manufacturing base is the only solution to rising trade deficit and industrial job loss. Manufacturing promotes innovation which leads to investments in equipment and people, research and development, improved products and processes and increase in productivity and higher standards of living. Increase in manufacturing leads to increase in demand for raw materials and other commercial services.

United States has transitioned from an agricultural economy to Industrial economy to a service economy. Over a period of this transition US has lost its manufacturing base substantially and has been importing goods from around the world which has resulted into huge trade deficit and industrial job losses. IMF has categorized the US current account deficit as unsustainable. Warren Buffet also once commented “The U.S trade deficit is a bigger threat to the domestic economy than either the federal budget deficit or consumer debt and could lead to political turmoil… Right now, the rest of the world owns $3 trillion more of us than we own of them.”

Since the United States joined the WTO, US trade deficit has risen from $150.6 billion in 1994 to $817.3 billion in 2006. US reliance on imports ranges from electronic items to apparels and other consumables. For example, electronic items sold in United States are developed by companies such as Philips, Toshiba, Sony, Hitachi, Samsung and Sharp. We have lost significant market share in Auto Industry also. Toyota has surpassed General Motors to become leading auto manufacturer in terms of global sales. Ironically, items such as clothing and apparel where USA had its dominance are also being imported from foreign countries. Over 90 percent of clothing and shoes sold in the United States are made in foreign countries. US economy has thrived on consumerism which has led to increase in demand for goods over the years but production of domestically manufactured goods has been declining, thereby giving rise to imports from foreign countries and loss of industrial jobs.

Critics of the argument say it is the increase in production efficiencies, resulted from technological innovation and advancement that has resulted in loss of jobs. Additionally, it is the increase in consumption which is the root cause of import deficit rather than shrinking manufacturing base. Undoubtedly long term data indicates an increase in US manufacturing, but the way we are loosing our manufacturing share from last 2 decades and if we continue shrinking, we will soon have no choice but to consume whatever is dumped in our market and will be on the mercy of foreign imported goods. Increase in manufacturing has not kept pace with global growth in manufacturing in USA. Since 2000 global manufacturing growth has been 47%, whereas USA has recorded a growth rate of only 19%.

ORIGIN OF THE ISSUE & SOLUTION
What is causing shrinking manufacturing base in the United States? Is it purely competitive and cheaper products manufactured in Asia and Europe or some other factors are also responsible? Undoubtedly competitive global business environment has severely affected domestic production in the United States, this crisis in large arises due to unfair and unethical business practices adopted by its trading partners mainly China. Some of those practices are significant government subsidies, currency manipulation, large-scale dumping in the U.S. market, and other market-distorting practices. Additionally, unfavorable govt. policies, tax structure, increase in cost involved in healthcare, litigation, and regulation has significantly affected the bottom line. Increase in cost and strict regulation forced manufacturing units to move their facilities to other countries where companies do not face those kinds of impediments. Companies operating in the U.S. started outsourcing low-value tasks like simple assembly or circuit-board stuffing, but lower cost of outsourcing and shrinking margin lured them to continue outsourcing sophisticated engineering and manufacturing capabilities that are crucial for innovation in a wide range of products. As a result, the U.S. has lost or is in the process of losing the knowledge, skilled people, and supplier infrastructure needed to manufacture many of the cutting-edge products it invented.

Is there any way to bring back our manufacturing base? The view that the U.S. should focus on R&D and services is completely flawed. Manufacturing is part of the innovation process and United States has to expand its manufacturing base to remain a world leader.

Following may be suggested to address the issue:

(1) Increase the tariffs on foreign goods so that they are more expensive than domestic goods.
(2) Demand the same level of quality in all foreign goods as American goods.
(3) Diplomatic measures should be taken to create pressure on foreign countries particularly China to stop manipulating their currencies.

Efforts should be made to open up foreign consumption markets adequately to U.S. producers so as to increase export and minimize trade deficit and should endeavor to combat predatory foreign trade practices aimed at undermining U.S. producers in their home market. Next big step is to promote small and medium enterprises to set-up manufacturing units.

SMALL & MEDIUM ENTERPRISES (SMEs); CATALYST OF SUSTAINABLE GROWTH
The issue of shrinking manufacturing base in the United States has been discussed by economist, policymakers, industrialists, and think tanks since economic integration and various measures to improve domestic manufacturing base have been suggested. But considering our free market dominance no sincere efforts were made to expand manufacturing base. Alarming rise in trade deficit and current economic and credit crisis which resulted in to massive industrial job loss has called for immediate intervention of private-public participation to protect and develop domestic manufacturing base for long term sustainable economic growth of United States. It is this time only that the role of SME manufacturers was felt inevitable to address this alarming issue.

President Obama during an interview said “We’ve got to make sure that we’re cultivating small businesses and entrepreneurs who are going to be driving employment growth,” the President said, “so that 20 years from now we can look back and we can say, ‘This was the pivot point, this is where we started to turn the corner.”

US need to change course at this point of time and need to develop a network of small and medium enterprises focusing on cleaner and green technology. The U.S. can explore strategies used in emerging markets for development of SMEs. According to Hau L. Lee, a professor at Stanford Graduate School of Business, “America needs large industrial zones devoted to specific industries–similar to zones in Taiwan, Singapore, Malaysia, and much of China. Such areas offer tax breaks, cheap or free land, workforce training, plenty of water and power, and agencies that serve as one-stop shops for all of the necessary permits and regulatory approvals.” A national level specialized financial institution may be created to provide low cost credit to newly setup SMEs in the manufacturing sector. US strength lies in high end technology, innovation, R&D, robust infrastructure, and know-how.

INITIATIVE FOR DEVELOPMENT OF SMEs

US govt. runs a number of programs for providing technological know-how, contracting opportunities, counseling and assistance, financing, and R&D facilities to small and medium enterprises. Some of the prominent programs run by US department of commerce are Manufacturing Extension Program, Advanced Technology Program, Technology Transfer, and Small Business Innovation Research (SBIR) Program. State govt. and number of govt. agencies are deployed for implementation of these schemes across the United States. SBA provides technical and financial assistance to SMEs through its partner lending institutions.

On November 17, 2009 The Goldman Sachs Group, Inc. launched 10,000 Small Businesses — a $500 million initiative for development of 10,000 small businesses across the United States. The plan envisaged to provide greater access to business education, mentors and networks, and financial capital to small businesses. Lloyd C. Blankfein, Chairman and CEO of Goldman Sachs quoted “Small businesses play a vital role in creating jobs and growth in America’s economy.” Warren Buffett, CEO of Berkshire Hathaway also mentioned “Our recovery is dependent on hard working small business owners across America who will create the jobs that America needs. I’m proud to be a part of this innovative program which provides greater access to know-how and capital – two ingredients critical to success.”

Sum2 LLC, a firm which assists SMEs in implementing sound business practices by offering a series of programs and products, announced The Hamilton Plan on Labor Day. The Hamilton Plan is a ten point program to foster the development of manufacturing in the United States by tapping the entrepreneurial energy of small and mid-size enterprises (SME). The Hamilton Plan requires concerted focus of investment capital to fund development and establishment of an SME Development Bank (SDB) which will focus, manage and administer capital formation initiatives to incubate and develop SME manufactures.

I contacted James McCallum, CEO of Sum2llc to discuss the issue of shrinking manufacturing base and how SMEs can help in restoring manufacturing base in the United States. In response to my comment here is what he stated “It is pretty amazing that the United States has not done more to specifically encourage and address the unique needs of this critical economic driver. Many Asian countries are miles ahead of the US in SME banking and capital formation. These banks have extensive portfolios of finance products and technical assistance they provide to SME’s. The reasons that the US lacks focus in this area are many. US commitment to free market forces has badly warped our economic infrastructure. SMEs in the US have primarily relied on community banks for financing. Most of which went for real estate and construction projects. SME manufactures have just about disappeared from the economic landscape of the US. The credit crash and the economic malaise are awakening our understanding of the critical nature of SMEs and our need to manufacture products. Goldman’s 10,000 Businesses Initiative coalesces nicely with the Hamilton Plan we developed in 2008.”

USA MANUFACTURING & SMEs IN YEAR 2030

With the concerted government efforts for promotion and development of SMEs and private sector initiatives such as “10,000 Small Businesses plan” by Goldman, SMEs will be largely benefited having access to innovative financial products and services from a network of financial institutions. Ten point program suggested in Hamilton plan, if implemented, will bring cluster based development of SME manufacturers. Cleaner and green technology will drive long term sustainable growth, increase national income and result in employment creation. Healthy SMEs will be focusing on export of goods thereby reducing the trade deficit and offer a new market for commercial banking sector. High-tech growth oriented SMEs will also have access to private equity investments and will offer a new avenue of diversification to private equity industry.

But the task of SME development is a challenging task and requires strong will on the part of different stakeholders. SMEs are considered to be the riskiest segment of borrowers from a financial institution’s perspective and thus struggle for timely and adequate credit. Access to technical and market information, financial assistance and trained and educated workers is the biggest challenge for SMEs. Future SMEs require sound business practices such as corporate governance, risk management, stakeholder communications and regulatory compliance.

I believe that SMEs are sine qua non for manufacturing sector & I can foresee a bigger space for SMEs in next 20 years from now. I am so intrigued with the idea of SMEs development and their contribution in the economic growth that in the long run I wish to work as a freelancer offering consultancy and advisory services on financial and strategic matters to SMEs. I would work with a network of financial institutions, venture capitalists, engineers, environmentalists, social workers, suppliers, and policy makers so as to offer SMEs a comprehensive set of services.

APPENDIX: REFERENCES

U.S. Needs to Return to Its Manufacturing Base
http://seekingalpha.com/article/119136-u-s-needs-to-return-to-its-manufacturing-base

Securing America’s Future: The Case for a Strong Manufacturing Base, A Study by Joel Popkin and Company, Washington, D.C. June 2003, Prepared for the NAM Council of Manufacturing Associations

http://www.pmihome.org/Popkin_Study_3-03.pdf

President predicts it will take decades to revive declining U.S. manufacturing base?

http://www.sodahead.com/united-states/president-predicts-it-will-take-decades-to-revive-declining-us-manufacturing-base/question-637119/

Manufacturing & Investment Around The World: An International Survey Of Factors Affecting Growth & Performance, ISR Publications, revised 2nd edition, 2002. ISBN 978-0-906321-25-6.

Economy Watch: Economy, Investment & Finance Report

http://www.economywatch.com/world_economy/usa/export-import.html

USA Manufacturing output continues to increase (over the long run), Curious cat, Investing and economics blog

http://investing.curiouscatblog.net/2008/12/02/usa-manufacturing-output-continues-to-increase-over-the-long-term/

Alliance for American Manufacturers http://www.americanmanufacturing.org/issues/manufacturing/the-us-manufacturing-crisis-and-its-disproportionate-effects-on-minorities/

Can the future be built in America? http://proquest.umi.com.remote.baruch.cuny.edu/pqdweb?index=28&did=1860761601&SrchMode=1&sid=2&Fmt=3&VInst=PROD&VType=PQD&RQT=309&VName=PQD&TS=1259505905&clientId=8851

TO SAVE AMERICAN MANUFACTURING: USBIC’S PLAN FOR AMERICAN INDUSTRIAL RENEWAL BY Kevin L. Kearns, Alan Tonelson, and William Hawkins

http://americaneconomicalert.org/USBIC_Save_American_Manufacturing_Jobs_Plan.pdf

Goldman Sachs Launches 10,000 Small Businesses Initiative

http://www2.goldmansachs.com/our-firm/press/press-releases/current/10-k-business.html

Goldman Sachs as Social Entrepreneur http://sum2llc.wordpress.com/

Hamilton Plan by Sum2llc http://sum2llc.wordpress.com/2008/09/03/sme-development-bank/

You Tube Video: Isley Brothers, Work to Do

Risk: SME, manufacturing, economic revitalization, social wealth

Advertisements

February 3, 2010 - Posted by | business, commerce, economics, Hamilton Plan, manufacturing, recession, SME | , , , , , , , , , , , , , , , , , , ,

No comments yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: